Seimitsu LS-56 to fix TwinStick ?

Discuss VO-related projects (Twin Sticks, etc.)
Post Reply
User avatar
Fredo
Virtual-On Positive
Posts: 167
Joined: 15 Oct 2009, 01:26
Gamertag: Fredo EA8D
Location: France

Seimitsu LS-56 to fix TwinStick ?

Post by Fredo » 08 Oct 2013, 03:22

Hey guys, I have a problem with my Dreamcast TwinStick:
DSC_0339.jpg
As the Dreamcast TwinSticks seem to be based on LS-56 joysticks, I was wondering if I could use some parts of LS-56 to fix this ?

LS-56 parts
ls56_xp.jpg
Dreamcast Twin Stick parts
twinstick-4.jpg
twinstick.jpg
The spring holder seems a bit longer for the Twin Stick, would it work too eventhough ? Or is their another way to fix this or to find a spare part ?

Thanks for the help.
Image
VOOT: Raiden, Apharmd C, Apharmd B, Cypher, Temjin

French VO Pilot !

User avatar
MentholMoose
Virtual-On Positive
Posts: 2002
Joined: 15 Dec 2008, 22:06
Gamertag: MentholMoose
PSN: MentholMoose_
Location: California
Contact:

Re: Seimitsu LS-56 to fix TwinStick ?

Post by MentholMoose » 08 Oct 2013, 09:32

Yes, you can use the spring catch from the LS-56. Another forum member confirmed this a few years ago.

Dreamcast Twin Stick Repair

This is the most common point of failure in DC Twin Sticks. The yellow spring catches in DC Twin Sticks are known to be weak, and in the second production run were replaced with stronger ones that were green. When you replace it, make sure to apply enough lubricant.
MentholMoose

User avatar
Fredo
Virtual-On Positive
Posts: 167
Joined: 15 Oct 2009, 01:26
Gamertag: Fredo EA8D
Location: France

Re: Seimitsu LS-56 to fix TwinStick ?

Post by Fredo » 08 Oct 2013, 10:44

Ok, thanks for the confirmation ! :D

Ho, and the same problem occured to my Saturn TwinStick, any clues on how to fix it ?
Image
VOOT: Raiden, Apharmd C, Apharmd B, Cypher, Temjin

French VO Pilot !

User avatar
MentholMoose
Virtual-On Positive
Posts: 2002
Joined: 15 Dec 2008, 22:06
Gamertag: MentholMoose
PSN: MentholMoose_
Location: California
Contact:

Re: Seimitsu LS-56 to fix TwinStick ?

Post by MentholMoose » 09 Oct 2013, 00:39

I don't recall a solution specific to the issue on Saturn Twin Sticks. Does the spring catch look similar to one from the DC Twin Sticks / LS-56? Years ago before anyone knew about the LS-56 compatibility, people would replace broken spring catches on DC Twin Sticks with metallic thread spools that were cut in half. These are essentially indestructible, though may add to the wear and tear of other components.
MentholMoose

User avatar
Fredo
Virtual-On Positive
Posts: 167
Joined: 15 Oct 2009, 01:26
Gamertag: Fredo EA8D
Location: France

Re: Seimitsu LS-56 to fix TwinStick ?

Post by Fredo » 09 Oct 2013, 00:54

It's not really a spring catch like for the DC TS.

It's the small black plastic washer on this picture, except it's white in my case:
Image

I tried to replace it by a metallic washer, but it does not work properly, the stick has no spring return for one direction.

[Edit] Problem solved: I just bought a new Saturn TwinStick and a pair of Seimitsu LS-56 to fix my two TwinSticks ! :D
Image
VOOT: Raiden, Apharmd C, Apharmd B, Cypher, Temjin

French VO Pilot !

User avatar
Fredo
Virtual-On Positive
Posts: 167
Joined: 15 Oct 2009, 01:26
Gamertag: Fredo EA8D
Location: France

Re: Seimitsu LS-56 to fix TwinStick ?

Post by Fredo » 12 Oct 2013, 03:55

Back agin with a new question:

The two Seimitsu sticks I was about to buy were no LS-56 but LS-33, which do not have the spring catch I'm looking for. Thankfully I didn't purchase them.

Since finding LS-56 joysticks in France has become quite hard, I was wondering if LS-58 joysticks would work too, as they seem to share a lot with the LS-56, including the precious spring catch:
Image
http://forums.shoryuken.com/discussion/ ... -questions

Can anyone confirm ?
Image
VOOT: Raiden, Apharmd C, Apharmd B, Cypher, Temjin

French VO Pilot !

User avatar
MentholMoose
Virtual-On Positive
Posts: 2002
Joined: 15 Dec 2008, 22:06
Gamertag: MentholMoose
PSN: MentholMoose_
Location: California
Contact:

Re: Seimitsu LS-56 to fix TwinStick ?

Post by MentholMoose » 12 Oct 2013, 14:25

Sorry, I don't know about the LS-58. If you can find schematics, check the shaft diameter to see if it matches the LS-56. If it matches, the spring catch should be the same or at least compatible.

However, first I suggest contacting Seimitsu directly to ask for the LS-56 spring catches. They shipped some to forum member Jumbo in the US without a problem. That was a few years ago, though.
MentholMoose

User avatar
Fredo
Virtual-On Positive
Posts: 167
Joined: 15 Oct 2009, 01:26
Gamertag: Fredo EA8D
Location: France

Re: Seimitsu LS-56 to fix TwinStick ?

Post by Fredo » 12 Oct 2013, 16:24

Ok, I've tried contacting Seimitsu (in English + Japanes Google Tard), and asked to buy some LS-56 spring catches. I'm waiting for the answer.
Image
VOOT: Raiden, Apharmd C, Apharmd B, Cypher, Temjin

French VO Pilot !

User avatar
Fredo
Virtual-On Positive
Posts: 167
Joined: 15 Oct 2009, 01:26
Gamertag: Fredo EA8D
Location: France

Re: Seimitsu LS-56 to fix TwinStick ?

Post by Fredo » 26 Oct 2013, 14:35

Seimitsu does not seem to want to answer my request... :cry:

By the way, I've found this page whose author seems to have thought a lot about fixing thos spring catches, with several ideas:
http://blog.goo.ne.jp/kagami-en/e/59b0c ... b3a1da9cc5
http://blog.goo.ne.jp/kagami-en/e/b28be ... 7ac02fde18
custom_spring_catch.png
custom_spring_catch2.jpg
(10.94 KiB) Not downloaded yet
repai_spring_catch.png
repair_spring_catch.jpg
(17.89 KiB) Not downloaded yet
I'll try the second option to fix my stick.

I also found this diagram thar seems to show that by adding some kind of thin washer, you could prevent those spring catches from breaking, translation would be appriciated :D :
up.gif
Image
VOOT: Raiden, Apharmd C, Apharmd B, Cypher, Temjin

French VO Pilot !

User avatar
Fredo
Virtual-On Positive
Posts: 167
Joined: 15 Oct 2009, 01:26
Gamertag: Fredo EA8D
Location: France

Re: Seimitsu LS-56 to fix TwinStick ?

Post by Fredo » 27 Oct 2013, 12:21

Hey, I've tried this method:

Image

And I must admit it works surprisingly well ! you can hardly feel any difference ! :D

Good thing to know ;)
Image
VOOT: Raiden, Apharmd C, Apharmd B, Cypher, Temjin

French VO Pilot !

Post Reply