just ordered OMG from amazon. haven't fixed my sticks yet (going to try maybe this week if i can decode (IE: for morons) menthol's fixit suggestion.
since then however, i have been getting better at using the DC controller, liking it, it is a much different feel.
getting OMG
-
- Virtual-On Positive
- Posts: 2059
- Joined: 15 Dec 2008, 22:06
-
- Virtual-On Positive
- Posts: 151
- Joined: 06 Feb 2009, 21:47
Re: getting OMG
nope (><) when they were open, i didn't see anything wrong, but i'll open them again.
-
- Virtual-On Positive
- Posts: 151
- Joined: 06 Feb 2009, 21:47
Re: getting OMG
there were some threads or something sticking out of the cord in the first picture




nothing that i can see. i'm going to try my hand at VOOT again see if the problem is fixed.




nothing that i can see. i'm going to try my hand at VOOT again see if the problem is fixed.
-
- Virtual-On Positive
- Posts: 2059
- Joined: 15 Dec 2008, 22:06
Re: getting OMG
What's the problem again?
In the last photo (of the open stick), also check where the wires connect to the PCB, and make sure the connection is solid.
In the last photo (of the open stick), also check where the wires connect to the PCB, and make sure the connection is solid.
MentholMoose
-
- Virtual-On Positive
- Posts: 151
- Joined: 06 Feb 2009, 21:47
Re: getting OMG
the left stick seems(ed) to have problems with turning left directions
\ up left
-- left
/ bottom left
i didn't get a chance to try the twinsticks yesterday, but will try again today (am at school currently).
i'm fairly sure that the wires connecting to the PCB were solid. none seemed loose (and i didn't know how to test besides giving a gentle tug on each one) is there a way i can just push them in?
thanks -D
\ up left
-- left
/ bottom left
i didn't get a chance to try the twinsticks yesterday, but will try again today (am at school currently).
i'm fairly sure that the wires connecting to the PCB were solid. none seemed loose (and i didn't know how to test besides giving a gentle tug on each one) is there a way i can just push them in?
thanks -D
-
- Virtual-On Positive
- Posts: 2059
- Joined: 15 Dec 2008, 22:06
Re: getting OMG
My previous suggestion (regarding the PCB at the top of each stick) only applies to the weapon and trigger buttons.circuscommando wrote:the left stick seems(ed) to have problems with turning left directions
\ up left
-- left
/ bottom left
i didn't get a chance to try the twinsticks yesterday, but will try again today (am at school currently).
i'm fairly sure that the wires connecting to the PCB were solid. none seemed loose (and i didn't know how to test besides giving a gentle tug on each one) is there a way i can just push them in?
thanks -D
For the various wires that have connectors in the base, you can push them in to ensure they are connected.
MentholMoose
-
- Virtual-On Positive
- Posts: 151
- Joined: 06 Feb 2009, 21:47
Re: getting OMG
hey, so i tried out my stick again, everything was working, except for RT >.< the stick that i didn't open, so i'll do that when i have time.